FEATURES
The D-MIG 350 delivers 145 Amps in direct current. It can be used with wires that require shielding gas (MIG / MAG) and also with a special cored wire that does not require shielding gas (NO GAS).
It houses spools of wire diameter 100 - 200 mm.
Appropriately equipped, it allows the welding of various metals even of reduced thickness: steel, stainless steel, aluminum.
It has low energy consumption: it can be used with reduced installed powers (3 kW).
The D-MIG 350 is easy to use:
- Trolley with wheels, front feet and rear cylinder holder.
- Table to help you correctly adjust the welding parameters.
- Thermostatic protection.
- Forced ventilation.
TECHNICAL SPECIFICATIONS
| Adjustment range (Amp): | 35 - 145A |
|---|---|
| Welding positions (N °): | 4 |
| Amp Service 40 ° C - EN 60974-1: | 115A - 15% 60A - 60% |
| No-load voltage (Volt): | 31 - 49V |
| Supply voltage volt (50/60 Hz): | 1 Ph - 230V |
| Power consumption 60% / Max: | 1.4 / 2.7 kW |
| Fuse (Amp): | 16A |
| Steel wire (Ø mm): | Ø 0,6 - 0,8 mm |
| Stainless steel wire (Ø mm): | Ø 0,8 mm |
| Al.Mg - Al.Si wire (Ø mm): | Ø 0.8 - 1.0 mm |
| Cored wire (steel) (Ø mm): | Ø 0.9 mm |
| Usable Wire Spool : | Ø 100 - 200 mm |
| Wire feeder: | 2 rollers |
| Outgoing connections: | Direct |
| Thermostatic protection: | yes |
| Weight kg ≅: | 29 |
| Dimensions (mm): | 760 x 360 x 490 |
| Gas solenoid valve: | no |
| INSTRUCTION MANUAL |
SUPPLIED
Torch mt. 2
Cored wire 0.9 mm.
Steel wire 0,6 mm.
Cable with ground clamp
Tank adapter